NALQIRA

Aquarium Volume Calculator

Find gross volume first. Add optional measurements to see approximate working volume separately.

Unit system
External dimensions

Measure outside the glass. Three external dimensions are enough for gross volume.

Optional measurements

Working volume requires both glass thickness and the top water gap. Leave unknown fields empty; enter 0 for a known zero gap.

Enter only water you have measured or actually added. Leaving this empty does not produce a net volume.

Gross volume

— L

Enter all three external dimensions first.

Geometric volume of the external dimensions; this is not the actual amount of water.

Approximate working volume

— L

Enter all three external dimensions first.

Accounts for glass and the top gap. No automatic deductions for substrate, decor or equipment.

Measured actual net water

— L

Net water has not been measured or entered.

Only your measurement; kept separate from calculated volumes.

What do these volumes mean?

What is gross volume?

External length × external width × external height ÷ 1000 (cm and L). This is the outer envelope, not usable water.

What is approximate working volume?

(Length − 2t) × (width − 2t) × (height − t − top gap) ÷ 1000. Glass t is converted from mm to cm. Both glass and the top gap must be known.

Why can actual net water differ?

Substrate, decor, equipment and the actual water level affect how much water is added. Net volume is measured, not generated by a percentage deduction. A measurement is not corrected to match the working estimate; it cannot exceed the gross outer envelope.

Which volume helps with equipment planning?

A valid approximate working volume is a closer starting point for water planning than gross volume. Also consider measured net water separately. If working volume is missing, add glass and the top gap; do not substitute gross volume. Equipment selection also depends on tank conditions and manufacturer information.

Calculations use cm and L. US units convert inputs and results; glass always stays in mm.