NALQIRA

Aquarium Heater Calculator

Evaluate approximate heater power from working volume and temperature needs.

Unit system
Aquarium and room

Use approximate working volume accounting for glass and the top gap; do not substitute gross or measured net volume.

Not sure of your working volume? Find it in the volume calculator

Scope: 25–300 L; 5–15 °C difference. Target 0–50 °C, room −20–50 °C.

Approximate suggested heater power

— W

Enter working volume, target and room temperature.

An approximate selection guide, not a temperature guarantee. Open tops, drafts, room conditions and heat loss affect actual performance.

Reference and calculation approach

VERIFIED: Manufacturer table in the Sera English 2012 guide, page 21.

DERIVED: Linear interpolation is applied to intermediate volumes and temperature differences within the table. This is the NALQIRA calculation approach.

Approximate selection: raw values are retained; the suggestion is rounded up to the next supported total power step. This is not an absolute physical watt requirement.

Scope and power steps

Only 25–300 L and a 5–15 °C difference. No extrapolation or clamping to a boundary row.

Total power steps: 25, 50, 75, 100, 150, 200, 250, 300, 400, 500, 600 W.

At a 15 °C difference, the source gives 2 × 200/250/300 W for 200/250/300 L; these are treated as totals of 400/500/600 W here. This is not a device combination recommendation.

Sera source PDF — page 21